Your privacy choices
Is it built to last?
UV, wind, and rain resistant, AC Shade stays firmly in place through tough conditions.
Made from durable, high-quality materials, it won’t sag, shift, or need maintenance—season after season.
For extreme weather like snowstorms or hurricanes, simply remove it in 30 seconds and reinstall just as easily.
for more details, see the "What is it made out of" FAQ below
How does AC Shade handle wind? Is it wind-resistant?
Yes—wind resistance was one of the top priorities during development. AC Shade is engineered to stay secure in extreme weather conditions, safely releasing pressure in high winds.
Here’s how it works:
- Canopy design is only attached in a way which allows it to lift slightly and release wind pressure, rather than fighting it like a sail.
- permeable and UV-stabilized, reducing drag and preventing buildup of wind force underneath.
It’s been tested through strong storms and rooftop winds without issue. That said, for severe storms, we recommend removing it temporarily—a process that takes under 30 seconds with no tools.
Will AC Shade hold up on rooftops or in extreme weather?
Yes. The 3/4" UV stabilized, Furniture Grade PVC and the high-tensile fabric flexes under pressure without tearing. We do recommend removing for severe storms like tropical and hurricanes, simply remove the shade in under 30 seconds and reinstall once conditions improve.
How does AC Shade stay secured to my unit?
AC Shade attaches using weather-rated bungee cords that hook directly onto your condenser—no tools, drilling, or permanent modifications required.
After testing a wide range of fasteners (including clips, straps, and brackets), bungee cords proved to be the most universally compatible, durable, and wind-tolerant solution across all major condenser designs.
The result? A tight, secure fit that installs in under 30 seconds, stays in place during storms, and can be removed just as easily when needed—like before extreme weather or for seasonal storage.
What’s in the Box
-
1x AC Shade Canvas
-
4x Frame Poles (modular, snap-fit)
-
4x Corner Connectors
-
2x Middle Support Connector (T-style)
-
4x High-tech elastic securement devices (commonly referred to as bungee cords)
-
1x Quick Start Guide
-
6x Canvas Support Ribs
📸 [Insert unboxing photo or diagram here]
🎥 Watch the Setup Video
Coming soon
🧩 Step-by-Step Assembly
Step 1: Frame the Shade
- Connect the poles into a square using the corner connectors
- The 4 (A) posts form the inner frame
- Use the T-connectors on one side and the X connectors on the opposite side.
Step 2: Attach the Canvas
- Lay the canvas flat on the ground and place the inner frame inside the opening
- Align the sleeves with the poles
- Slide 2 (B) poles through the canvas sleeves and then push them firmly into the "T" connector.
- Insert the remaining four (B) poles into the corner canvas pockets, then slide them into the X-connector slots.
📸 
Step 3: Installation
-
Set the AC Shade on top of the Condenser unit, ensuring the open center section sits directly over the exhaust fan to allow for proper airflow.
- The shade should be arranged to allow maximum coverage during the hottest parts of the day.
- Tip: For most homes, this means positioning the center canvas section to face south to block midday sun.
Step 4: Secure in Place
- Use the 4 high-tech elastic securement devices (bungee cords).
- Hook one end of a bungee into the condenser grate near a corner.
- Stretch the bungee across the corner.
- Hook the other end into the grate on the opposite side.
- Tip: Stretch to about 90% of the cord’s maximum length for optimal tension.
- Repeat for all four corners.
Note: If any corner cannot be spanned, you can secure the bungee over the nearby PVC frame instead.
🛠 Need Help?
Email: support@cooleriscooler.com
Or visit: cooleriscooler.com/support
What is it made out of?
The frame is constructed from 3/4-inch UV-stabilized furniture-grade PVC, which is thicker, stronger, and more weather-resistant than standard hardware store PVC.
Why we chose it:
- Rated for outdoor use, with UV inhibitors to prevent sun damage or brittleness
- Resilient in heat and cold—it holds its shape without sagging or warping
- Smooth, clean finish that looks sharp and won’t yellow or chalk over time
We tested metal and other materials too, but this PVC gave us the best balance of strength, weight, cost, and long-term durability. It also allows us to maintain a modular design that can fit most units—and be installed or removed in seconds.
The canopy is made from heavy-duty, UV-stabilized mesh fabric designed specifically for long-term outdoor exposure. It’s the same class of material used in high-end patio furniture and commercial shade structures.
It’s:
- So it doesn’t trap heat or moisture
- With a 10-year UV warranty from the manufacturer
- Sun, rain, wind, and debris for years
We chose this fabric after extensive testing to make sure it would hold up under intense summer conditions without sagging, stretching, or breaking down over time.
Do I need special tools?
No, the design is simple to assemble and installs with no tools required. Snap it on, and go!
Go the Manuel page on this site to see the step-by-step instructions.
How long does it take to assemble and install?
The AC Shade takes about 5 minutes to assemble and another minute or two to install. It is just as fast to uninstall and reinstall as needed. See the Manual page for step-by-step instructions.
Are there any extra items I will need, or is everything in the box?
Everything you need to assemble and install the AC Shade is in the box.
What’s in the Box
- 1x AC Shade Canvas
- 4x Frame Poles (modular, snap-fit)
- 4x Corner Connectors
- 1x Middle Support Connector (T-style)
- 4x High-tech elastic securement devices (commonly referred to as bungee cords)
- 1x Quick Start Guide
Will this fit my AC Unit?
When you order AC Shade, we’ll walk you through three quick measurements:
- Fan-grill diameter
- Width across the top of the condenser
- Depth from front to back
Once we have those numbers, we’ll ship you a perfectly sized Shade that drops right into place—no guessing required.
Note: Some curved-top models (e.g., certain Lennox units) can sit a little proud. If you’re unsure, just send us a photo of your condenser, and we’ll make sure it’s the perfect fit before we ship.
Will installing the AC Shade void my AC Units warranty?
No, AC Shade was engineered in collaboration with the Oklahoma State University to improve the airflow and reduce stress on your condenser. It's safer than trees, umbrellas, or DIY hacks that trap heat or damage your AC Unit.
How much clearance do I need?
The AC Shade extends 20" out from the condenser on 3 sides.
Does it work for dual units?
Typically Yes, if you have less than 20" between your machine.
If not, please reach out to us at Support@CoolerisCooler.com and we will help you determine if there is a workable scenario for your situation.
Is it compatible with heat pumps?
Yes! AC Shade works great with heat pumps during the cooling season, just like with standard air conditioners.
We do recommend removing it during the winter if your heat pump runs in heating mode, since the unit needs full exposure and airflow year-round in that case. But don’t worry—it installs and uninstalls in under 30 seconds without tools, so it’s easy to take off before winter and pop back on in the spring.
If your heat pump is in cooling mode most of the year (like in milder climates), you can likely leave it on longer.
Does AC Shade help or hurt the airflow?
By shading the AC unit from direct sunlight and keeping the air around the intake cooler, it helps the unit work more efficiently to cool your home.
Engineered in partnership with Oklahoma University the design of AC Shades ensures the exhaust flow is not obstructed, allowing for strong airflow.
Can I shade my AC Unit with a tarp or an umbrella?
No, umbrellas and tarps trap heat, causing the AC Unit to overheat due to lack of airflow, leading to damage and increased utility bills.